Shopping Cart
LanguagesEnglish

Privacy Notice   |   Create Account   |   Log In

Installation

All Projector Lamp House products will be shipped with an installation packet. The packet contains all the parts you will need to install your lamp within ten minutes.

1, Turn the projector off and unplug it.

2, Let it cool for 60 minutes.

3, Turn the projector upside down on a flat surface.

4, Loosen the captive screws the fasten the lamp module to the projector.

5, Lift the lamp module out of the projector.

6, Insert the new lamp into the projector, making sure that the connector inside fully engages.

7, Tighten screws

8, Plug the power cord in and turn on the projector.

9, Reset the lamp timer.(Depond on your projector)

10, Plug the power cord in and turn on the projector.